Speco Technologies Security Camera HTD8SCS User Manual

HTD8SCS Series  
540 Line Color Dome Camera  
Wall & Ceiling Mountable  
Please read this manual thoroughly before operation and keep  
it handy for further reference.  
 
Contents  
Package Contents  
3
Precautions  
4
Camera Installation  
Internal Components  
5-6  
7
Features  
OSD  
8
9
1
 
Operating Your Camera  
10  
10  
SET UP  
SET UP LENS  
10  
10  
10  
SHUTTER SPEED CONTROL  
BACK LIGHT  
AUTO GAIN (AGC)  
WHITE BALANCE  
CAMERA TITLE  
MIRROR  
11  
11  
12  
12  
12  
DAY/NIGHT/SYNC  
MOTION DETECTION  
PRIVACY  
12  
13  
GAMMA  
13  
13  
RESET  
ADJUST  
13  
EXIT  
Specifications  
Dimensions  
Warranty  
14  
15  
16  
2
 
PACKAGE CONTENTS  
Please make sure that the following items are included  
in the package:  
1 CAMERA & Easy Mount Plate  
ACCESSORIES:  
4 MOUNTING SCREWS  
4 SET SCREWS  
1 RUBBER CABLE CAP  
1 VIDEO TEST LEAD  
1 WRENCH  
Please leave this manual with the end-user for future  
reference.  
3
 
PRECAUTIONS  
THIS DOME CAMERA SHOULD BE ONLY INSTALLED BY  
QUALIFIED PERSONNEL  
TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE  
PROPER POWER CABLE  
PLEASE USE AN APPROVED REGULATED 12 VOLT DC  
POWER SUPPLY LIKE THE SPECO PSW-5  
PLEASE USE APPROPRIATE LOW VOLTAGE POWER CABLE  
TO PREVENT FIRE OR ELECTRICAL SHOCK  
PLEASE INSURE THAT YOUR INSTALLATION AREA CAN  
SUPPORT THE WEIGHT OF THE CAMERA  
PLEASE HANDLE THIS CAMERA CAREFULLY:  
- DON’T USE A STRONG OR ABRASIVE DETERGENT WHEN  
CLEANING THE CAMERA.  
- DO NOT EXPOSE THE CAMERA TO DIRECT SUN  
4
 
CAMERA INSTALLATION  
1. Assembly  
Easy Mount Plate  
Rubber Cap used when cables  
go through the mount  
Mounting Screws (4ea)  
SET Screws (2ea)  
Camera Base  
Camera Body  
OSD Joystick &  
Video Test Connector  
Focus & Zoom Controller  
Front Case  
SET Screws (2ea)  
Outer Housing  
5
 
CAMERA INSTALLATION  
2. Compatibility  
7246WMT  
CVC-TPEXT “A” type Box  
“B” type Box  
BCP(Using 7246WMT)  
[CVCTPLATE Hole Description]  
Hole 1 : 7246WMT / CVCTPEXT  
Hole 2 : Electrical Box “A” type  
Hole 3 : Electrical Box “B” type  
6
 
INTERNAL COMPONENTS  
Video Test Terminal  
OSD Joystick Switch  
UP  
SET  
RIGHT  
LEFT  
DOWN  
Push the Joy stick for one second, and the OSD appears  
on the screen. Move the Joy Stick up, down, left & right to  
control the OSD functions.  
7
 
Features  
BLC  
When the image is in front of strong background lighting,  
your camera allows you to get a clear image.  
High Resolution  
Horizontal resolution of 540 TV lines is  
achieved by using a SONY Double Speed CCD with  
410,000 pixels, yielding pictures with a high S/N ratio.  
OSD  
All camera functions are menu driven for easy use.  
ELECTRONIC DAY/NIGHT  
The camera can show color pictures in all lighting  
conditions, or you can have it automatically switch to a B/W  
picture in low light conditions  
Motion Detection  
Built in motion detector with adjustable areas of coverage will  
flash a warning on the screen when motion is detected.  
8
 
Operating your camera  
OSD Function  
LENS  
DC  
MANUAL  
FLK  
SHUTTER  
AUTO  
FIXED  
MANUAL  
BLC  
OFF  
ON  
AGC  
OFF  
ON  
WHITE BAL.  
ATW  
AWB  
FIXED  
MANUAL  
FUNCTION  
RETURN  
CAMERA ID  
ON  
OFF  
OFF  
MIRROR  
ON  
DAY / NIGHT  
COLOR  
AUTO  
B/W  
MOTION DET  
ON  
OFF  
OFF  
PRIVACY  
ON  
GAMMA  
0.05~1.00  
LANGUAGE  
ENGLISH  
RESET  
USER  
한국어  
汉语  
漢語  
日本語  
ADJUST  
CONTRAST  
SHARPNESS  
CB_GAIN  
CR_GAIN  
RETURN  
RETURN  
9
 
Operating your camera – SETUP  
1) LENS  
<DC / MANUAL>  
Selects Lens Type.  
2) SHUTTER  
<AUTO / FLK / FIXED / MANUAL  
>
Adjusts shutter settings.  
Flicker-less mode (FLK) reduces on-screen flickering.  
Electronic Shutter Control (AUTO) adjusts brightness level on screen.  
Manual mode allows you to adjust the shutter speed  
from1/60~1/120,000 of a second (NTSC), or 1/50~1/100,000(PAL).  
FLK is the only option available when the camera lens is set to the  
recommended DC mode.  
3) BLC  
<ON / OFF>  
Provides light level control to overcome severe  
backlighting conditions.  
4) AGC  
<ON / OFF>  
Adjusts value of AGC gain. Increase the GAIN level to brighten the  
picture. (noise / distortion may develop)  
10  
 
5) WHITE BAL.  
<ATC / AWB / FIXED / MANUAL>  
Controls color on the screen.  
Select Auto Tracking White Balance (ATW) when the color  
temp. is 2400°K~12000°K (for example when under a fluorescent  
light or outdoors).  
Manual mode allows you to increase or decrease the red  
or blue factor on screen.  
Auto White Balance Control (AWC) automatically adjusts  
the white balance to your specific environment.  
6) FUNCTION  
(6-1) RETURN  
Return to the main SETUP menu.  
(6-2) CAMERA ID  
<OFF / ON>  
Display a name and/or  
number on the monitor.  
To add a camera title:  
CAMERA ID : Select character by moving joystick up and  
down.  
C = Delete the entire name and start again.  
POSITION = Position the camera title on the screen.  
Push down the button to set the position.  
11  
 
(6-3) MIRROR  
<ON / OFF>  
Produce a horizontal mirror image on screen.  
(6-4) DAY / NIGHT  
<AUTO / COLOR / BW>  
AUTO = Automatically switches between color or black/white.  
Delay – When the Day & Night function starts or stops (0~15sec)  
Start Level – Set the brightness level to determine where the Day &  
Night function start to operate  
End Level – Set the brightness level where the Day & Night  
function switches back  
COLOR = Full time color mode  
B/W = Full time B/W mode  
(6-5) MOTION DET  
<ON / OFF>  
AREA = Select motion detection area.  
MOTION TH = Select low luminous motion threshold value.  
MOTION TRACE = Display motion trace.  
(6-6) PRIVACY  
<ON / OFF>  
12  
 
AREA SEL = Select a motion detection grid (top left, top ,right, bottom left,  
bottom right) to modify.  
AREA STATE = Activate or deactivate the selected grid.  
LEFT/RIGHT/TOP/BOTTOM = Alter the dimensions of the selected grid.  
COLOR = Select color of privacy area.  
(6-7) GAMMA  
<ON / USER>  
Sharpen the image on screen.  
Excessive sharpening may cause picture noise.  
(6-8) LANGUAGE (English / 한국어 / 汉语/漢語 / 日本語)  
Choose the language that should be displayed.  
(6-9) RESET  
Restore all factory default settings.  
ADJUST  
7)  
Adjust level of sharpness / contrast / CB_Gain /  
CR_Gain.  
8) EXIT(SAVE)  
Save OSD settings and exit the SETUP menu.  
13  
 
SPECIFICATIONS  
ITEM  
540TV Lines IR DOME CAMERA  
12 Volts DC  
Power Requirements  
Image Sensor  
1/3”, SONY SUPER HAD CCD 410,000 pixels  
Effective Pixels  
Maximum Aperture Ratio  
Scanning System  
768(H) x 494(V) (NTSC)  
1 : 1.3 ~2.0  
2 : 1 Interlaced 525 Lines / 60 Fields / 30 Frames  
Video Output  
Resolution  
1.0V [p-p] NTSC Composite, 75  
540 TV Line  
Lens Type  
2.8~11MM DC Auto Iris  
Back Light Compensation (BLC)  
Gain Control  
AUTO / OFF – Dynamically Adjustable  
ON / OFF - Dynamically Adjustable  
1/60 ~ 1/120,000 sec - Dynamically Adjustable  
ATW / FIXED / AWB / MANUAL  
0. 00Lux (48 IR LED ON)  
Electric Shutter Speed  
WHITE BALANCE  
Min. Illumination  
S/N ( Y signal)  
50dB (Weight On)  
Motion Detection  
ON / OFF – 4 Zones  
On Screen Display ( O.S.D )  
PRIVACY Function  
Built - in  
ON / OFF (4 Programmable Zone)  
-29~ +50( - 20~122)  
Operational Temperature  
Operational Humidity  
30% ~90% RH  
14  
 
DIMENSIONS  
* FRONT VIEW  
* SIDE VIEW  
15  
 
WARRANTY  
16  
 
MEMO  
 
200 New Highway  
Amityville, NY 11701  
631-957-8700  
Rev. 100125  
Speco Technologies is constantly developing product improvements.  
We reserve the right to modify product design and specifications without notice  
and without incurring any obligation.  
 

Sherwood Blu ray Player BDP 6003 User Manual
Sony Car Stereo System CDX R30M User Manual
Sony Cordless Telephone spp n1025 User Manual
Southbend Fryer 14 36 User Manual
Speco Technologies Security Camera CVC646HR User Manual
Star Manufacturing Griddle 824M User Manual
Sub Zero Double Oven DO30CE B TH User Manual
Sub Zero Ventilation Hood Model SRT484CG User Manual
Syba Tech Computer Hardware SD PEX10005 User Manual
Sylvania DVD Player DV220SL8 A User Manual